Art
MERGE (Lynnmour Sound Wall): Full Spectrum
On 25, Feb 2022 | In infrastructure, News, Project | By Admin
We took advantage of the beautiful February weather to go and see MERGE fully complete. This short video follows all 356m of the acoustic sound barrier that lies at the foot of Lynn Valley, between the Fern Street overpass and Lynnmour Creek along the newly reconfigured section of the Trans-Canada Highway (Hwy 1). The twenty naturalistic colours used in MERGE represent a selection of local flora, fauna and landmarks specific to the Lynnmour community and area.
@solidrockfencing
@KCIKraftConsultingInc
@NVanDistrict
***
MERGE (2022) Rebecca Bayer, 356m x 4m, Powder-coated Aluminum Acoustic Panels,
Trans-Canada Highway @ Keith Road, Lynnmour, District of North Vancouver, territories of the xʷməθkwəy̓əm (Musqueam), Skwxwú7mesh (Squamish), and Səl̓ílwətaʔ/Selilwitulh (Tsleil-Waututh) Nations
***
MERGE (Lynnmour Sound Wall) Update: BANANA SLUG
On 08, Dec 2021 | In infrastructure, Inspiration, News, Project | By Admin
MERGE features twenty colours representing a selection of local flora, fauna and landmarks specific to the Lynnmour community and Seymour River area, including the beloved Banana Slug.
One of our favourite images from the MERGE installation was taken by Jason Hardy from @solidrockfencing. Jason took this incredible photograph of an actual local Banana Slug sliding out from between panels in the Banana Slug segment just after they had been stored in a grassy area since the Spring.
Reconfiguring this section of Trans-Canada Highway (Hwy 1) is a large and complex undertaking and not without a one or two unforeseen challenges… such as the huge lamp post that was installed immediately in front of the ‘Banana Slug’ section!
Thanks to the friendly team at @solidrockfencing and @KCIKraftConsultingInc we were able to carefully reposition the Banana Slug panel and complete the 4m tall and 356m spectrum with the Banana Slug unobstructed 🙂
@solidrockfencing
@KCIKraftConsultingInc
@NVanDistrict
***
MERGE (2021) Rebecca Bayer, 356m x 4m, Powder-coated Aluminum Acoustic Panels,
Trans-Canada Highway @ Keith Road, Lynnmour, District of North Vancouver, territories of the xʷməθkwəy̓əm (Musqueam), Skwxwú7mesh (Squamish), and Səl̓ílwətaʔ/Selilwitulh (Tsleil-Waututh) Nations
***
MERGE (Lynnmour Sound Wall) Update: North Shore News
Many thanks to Brent Richter and Mike Wakefield from the North Shore News for this article about ‘MERGE’ #mergesoundwall.
***
“For too long, it’s been a traffic jam through a construction site. But the bottom of The Cut is taking on a whole new look.
Artist Rebecca Bayer is putting the final touches on Merge, a 366-metre-long shock of colour stretching along Highway 1 between Mountain Highway and Fern Street.
It is one of the final pieces of the $200-million Lower Lynn Improvement Project, intended to shield the Inter River neighbourhood from highway noise. But it’s also now likely the largest single piece of public art on the North Shore.
“An acoustic barrier wall could be very mundane and boring, but my hope with the bright colours is that it is more interesting and vibrant from both sides. It can be experienced at a slow pace, but also a fairly quick pace if you’re driving along the highway, and it sort of blurs together as you drive by,” she said. “I get pretty excited by public art that really blends with the infrastructure or architecture, and it just becomes part of something that was already going to be there anyway.”
Bayer chose the 20 different colours specifically because they are found in the flora, fauna and landmarks from the Lynn Valley area. Bayer consulted with the Lynn Canyon Ecology Centre to match colours with individual species like the red-backed salamander, Pacific chorus frog and licorice fern. She then tried out different permutations to come up with the pattern that exists there today. “There is quite an amazing pocket of nature right there,” she said. “It made sense to try to work with the natural palette in some way.”
On the Inter River side, the names of the species appear on some panels, which Bayer said she hopes will enable Merge to educate as well as beautify.
Lori Phillips, the District of North Vancouver’s public art officer who helped in the selection process of Bayer for the project, said it does both. “Merge is a perfect example of the magic that can happen when artists are added to infrastructure projects. Suddenly a rather understated sound wall is transformed into a dynamic public artwork that is free and accessible for everyone to enjoy,” she said. “The District of North Vancouver’s public art program, was thrilled to partner with the [Ministry of Transportation and Infrastructure] on this project and we know that the residents of Lynnmour, along with the thousands of daily commuters and travellers on Highway 1 will enjoy its masterful merge of colour and story, for years to come.”
Even as sound barriers/art canvasses go, the panels are a “world-class sound attenuation product” designed to neutralize sound, not just bounce it away from residences, said Mark Hersey, managing partner of Solid Rock Fencing, the company contracted to install the 623 panels.
Today, there are just a few gaps in the wall, which will be filled when the final panels arrive from Europe, Hersey said.
The final components of the Lower Lynn Improvement Project, including combining the Main Street and Dollarton Highway on-ramps into one with signalized traffic control, are expected to come online later this fall.”
***
Special thanks on this project go out to:
Jay Porter, BC Transportation and Infrastructure
Erin Moxton, North Vancouver District
Lori Phillips, North Vancouver Recreation & Culture
Tamsin Guppy, Lynn Canyon Ecology Centre
Rainer Kraft, KCI Kraft Consulting Inc.
Mark Hersey and Jason Hardy, Solid Rock Fencing Ltd.
***
MERGE (2021) Rebecca Bayer, 356m x 4m, Powder-coated Aluminum Acoustic Panels,
Trans-Canada Highway @ Keith Road, Lynnmour, District of North Vancouver, territories of the xʷməθkwəy̓əm (Musqueam), Skwxwú7mesh (Squamish), and Səl̓ílwətaʔ/Selilwitulh (Tsleil-Waututh) Nations
***
More info:
http://www.spacemakeplace.com/portfolio/merge-lynnmour-sound-wall/
MERGE (Lynnmour Sound Wall) Update: Colourful Transformation
On 17, Sep 2021 | In infrastructure, Make, Place, Project | By Admin
It’s been another productive week at MERGE. We want to offer a special thanks to Mark Hersey, Jason Hardy and the team from Solid Rock Fencing for their special attention to detail and careful installation of the 623 colourful acoustic panels. This project is starting to transform the landscape and has already made a huge difference in reducing the traffic noise level in the neighbouring Lynnmour community.
It is all coming together very nicely and everyone is excited to see the wall complete in the next few weeks.
MERGE (Lynnmour Sound Wall – 2021), will feature twenty naturalistic colours which represent a selection of local flora, fauna and landmarks specific to the Lynnmour community and area. Merge stands at 4m tall and spans 356m along the newly reconfigured section of the Trans-Canada Highway (Hwy 1) between Ironworkers Memorial Second Narrows Crossing and Lynn Creek. The acoustic dampening, sound wall sits between the highway and the residential neighbourhood along Keith Road and is clad in colourful powder-coated aluminum panels. The panels have been carefully configured to produce a giant, site-specific spectrum designed to be viewed by both passing traffic and residents in nearby communities.
@solidrockfencing
@KCIKraftConsultingInc
@NVanDistrict
Whereness turns 5!
Spacemakeplace is celebrating five years since the installation of ‘Whereness’. Located near the Langara /49th Avenue Canada Line Station, ‘Whereness’ was commissioned by Mosaic Homes for the City of Vancouver Public Art Program in 2016.
‘Whereness’ provides a tactile link between the area’s geological past and its current condition. The bottom boulder of the sculpture is a granite glacial erratic, deposited at this address thousands of years ago as a huge ice sheet receded up the Fraser Valley. This very boulder was scanned and replicated six times, then stacked to form a visual puzzle.
The sculpture acknowledges the practice of piling rocks at certain points along pathways to guide travellers crossing the landscape. This simple custom is still common across cultures around the world.
Coming Together To Give Back To The Community
On 18, Mar 2021 | In Inspiration, Make, News, Project | By Admin
On the anniversary of our COVID-19 life, we want to share some feel good news from 2020. With proceeds from the sale of “Come Together” (2020), we were able to donate back to the St. James Town Community Corner, near TTC Sherbourne subway station. “Come Together” is a bespoke, glazed ceramic tile mosaic (0.6m x 2.0m) commissioned by Louis Vuitton.
“Come Together” (2020) glazed ceramic tile mosaic (0.6m x 2.0m) Louis Vuitton. Yorkdale, Toronto.
The St. James Town Community Corner was one of the hosts to the original community pattern-making workshops that Spacemakeplace held in 2018 to gather pattern inspiration for the TTC mosaic. The donation from Spacemakeplace will be used in a program that offers employment to local refugee women to prepare meals for the elderly and vulnerable in the community over the COVID-19 crisis.
Store designers for Louis Vuitton contacted Rebecca last spring interested in acquiring a new work to be included in the Louis Vuitton international art collection. “Come Together” (2020) is displayed alongside new artworks by Toronto-based street artist BirdO, and Japanese artist Takashi Murakami, at the new Louis Vuitton Canadian flagship store located in Yorkdale Mall, Toronto.
“The Whole Is Greater Than The Sum Of It’s Parts”. TTC Sherbourne Subway Station. Toronto, ON
MERGE (Lynnmour Sound Wall) Update: Waidhofen, Austria
On 11, Mar 2021 | In infrastructure, Make, News, Place, Project | By Admin
Thanks to FORSTER and Rainer Kraft from Kraft Consulting for their recent photos of the colourful acoustic panels that have now been fabricated at Forster’s factory in Waidhofen, Austria. Later this summer (2021) these panels will be installed along side 356m of Trans-Canada Highway (Hwy 1) between Ironworkers Memorial Second Narrows Crossing and Lynn Creek in the District of North Vancouver.
The public artwork, MERGE, will feature twenty naturalistic colours representing a selection of local flora, fauna and landmarks specific to the Lynnmour community and area. The ~620 powder-coated aluminum panels have been carefully configured to produce a giant site-specific spectrum designed to be viewed by both passing traffic and residents in nearby communities.
MERGE (Lynnmour Sound Wall) Panels: FORSTER. Waidhofen, Austria
MERGE (Lynnmour Sound Wall) Panels: FORSTER. Waidhofen, Austria
MERGE (Lynnmour Sound Wall) Panels: FORSTER. Waidhofen, Austria
MERGE (Lynnmour Sound Wall) Panels: FORSTER. Waidhofen, Austria
MERGE (Lynnmour Sound Wall) Panels: FORSTER. Waidhofen, Austria
Joyful Math and “The Whole Is Greater Than The Sum Of Its Parts”
On 01, Jul 2020 | In Inspiration, News, Project | By Admin
2020 was full surprises. One nice surprise was to have “The Whole Is Greater Than The Sum Of Its Parts” community mosaic featured in a new math textbook for kids published by Stenhouse Publishers .
In Deanna Pecaski McLennan’s kindergarten classroom, math isn’t limited to a specific block of time. It’s built into the environment and inseparable from everything her young students do. All of the math is infused with a sense of exploration, wonder, and joy.
Our public art project is mentioned in the chapter titled “Art Beyond the Classroom Walls”. “The Whole is Greater than the Sum of Its Parts” is a series of 39 mosaics located throughout TTC Sherbourne station welcome commuters in the universal languages of colour and geometry.
Thank you to Deanna Pecaski McLennan and Stenhouse Publishing for reaching out to us.
Maple Ridge Community Mosaic: Installation
In December 2019, after months of careful planning and preparation, everything was ready for the final installation of the Maple Ridge Community Mosaic. The installation of the three mosaic walls took seven days.
Professional tile installer, Pedram ‘Tony’ Okhovat laying the first section of the Maple Ridge Community Mosaic on the shower wall adjacent to the main swimming pool at MRLC
Laser levels and spacers are used to make sure that the entire artwork is straight and evenly spaced
Sections of the shower wall mosaic are unboxed and prepared for installation
Tony applying fresh thinset to the waiting area wall ready to set mosaic sections
Rebecca calculating final measurements and custom cuts
Tony cutting tiles on the wet saw
Rebecca inspecting the waiting area wall
David and Tony hand-setting the edge details
Rebecca and Tony finishing the reception area mosaic
David removing the clear face tape from set tiles
Maple Ridge Community Mosaic: Artwork Assembly
When all the custom tiles had been extruded, baked, glazed, re-fired and ready, we began assembling the Maple Ridge Community Mosaics.
The twelve custom colours for the Maple Ridge Community Mosaic
The mosaics are prepared in small sections that are numbered and correspond to coordinates on a large map. Each of the ~14,500 custom made tiles are laid by hand, carefully following the design and using special templates to make sure that the tiles are evenly spaced. After each section has been laid, it gets checked, covered with a layer of clear face tape, coded, mounted to a protective card and boxed ready for transport to Maple Ridge.
Checking the details to ensure a perfect fit
Quality Control
Test layout
Applying face tape and section code
Marking boxes for shipment
Loading 1500lbs of artwork into the cargo van
Maple Ridge Community Mosaic: Made to Measure
The Maple Ridge Community Mosaic is installed in three locations inside the newly renovated Maple Ridge Leisure Centre; the main reception area, the waiting area outside the change rooms and also at the shower wall on the main pool deck. Careful measurements are needed throughout the entire design and installation process to make sure that all three mosaics fit as precisely as possible onto the renovated walls.
Inspecting the reception area wall during the MRLC renovations. Summer 2019
Inspecting the waiting area wall during the MRLC renovations. Summer 2019
Inspecting the pool shower area wall during the MRLC renovations. Summer 2019
MRLC Maple Ridge Community Mosaic: Made to measure
Maple Ridge Community Mosaic: Tile Manufacturing
We worked closely with Interstyle Ceramic + Glass to develop unique ceramic glazes to match the twelve Maple Ridge Community Mosaic colours as closely as possible. The twelve colours used for this project were selected from the palette of landscape colours we received over Fall 2018 from public photo submissions.
Triangle tile colour matching samples
Mixing 12 bespoke colour glazes and firing the ~14,500 tiles needed is a complicated task and Interstyle are industry experts.
Colour kitchen
Interstyle is a family owned and operated tile manufacturer located in Burnaby, BC. They have been in operation since 1977 and are among the only tile manufactures remaining in Canada.
Interstyle Ceramic + Glass. Burnaby, BC.
The Maple Ridge Community Mosaic will use equilateral tiles specially made for this project from Earthenglass, a tile produced from powdered recycled glass and locally sourced clays.
Blank tile bisque
Rebecca inspecting the tile bisque
Sheets of ‘Maple Ridge Dark Green’ triangle tiles